diff --git a/sound/soc/msm/Kconfig b/sound/soc/msm/Kconfig
index b47f9f6fa8bbc9dc693043e7430f67b4d4014d9b..93fbed38b25fe383cf6dd3b786b07067bfeb60a7 100644
--- a/sound/soc/msm/Kconfig
+++ b/sound/soc/msm/Kconfig
@@ -83,35 +83,6 @@ config AUDIO_OCMEM
 	 OCMEM gets exercised for low-power
 	 audio and voice use cases.
 
-config DOLBY_DAP
-	bool "Enable Dolby DAP"
-	depends on SND_SOC_MSM_QDSP6V2_INTF
-	help
-	 To add support for dolby DAP post processing.
-	 This support is to configure the post processing parameters
-	 to DSP. The configuration includes sending the end point
-	 device, end point dependent post processing parameters and
-	 the various posrt processing parameters
-
-config DOLBY_DS2
-	bool "Enable Dolby DS2"
-	depends on SND_SOC_MSM_QDSP6V2_INTF
-	help
-	 To add support for dolby DAP post processing.
-	 This support is to configure the post processing parameters
-	 to DSP. The configuration includes sending the end point
-	 device, end point dependent post processing parameters and
-	 the various posrt processing parameters
-
-config DTS_SRS_TM
-	bool "Enable DTS SRS"
-	depends on SND_SOC_MSM_QDSP6V2_INTF
-	help
-	 To add support for DTS SRS post processing.
-	 This support is to configure the post processing
-	 parameters to DSP. The configuration includes sending
-	 tuning parameters of various modules.
-
 config QTI_PP
 	bool "Enable QTI PP"
 	depends on SND_SOC_MSM_QDSP6V2_INTF
@@ -141,8 +112,6 @@ config SND_SOC_MSM8974
 	select SND_SOC_WCD9320
 	select SND_DYNAMIC_MINORS
 	select AUDIO_OCMEM
-	select DOLBY_DAP
-	select DTS_SRS_TM
 	select QTI_PP
 	help
 	 To add support for SoC audio on MSM8974.
@@ -161,7 +130,6 @@ config SND_SOC_APQ8074
 	select SND_SOC_MSM_HDMI_CODEC_RX
 	select SND_DYNAMIC_MINORS
 	select AUDIO_OCMEM
-	select DTS_SRS_TM
 	select QTI_PP
 	help
 	 To add support for SoC audio on APQ8074.
@@ -178,8 +146,6 @@ config SND_SOC_MSM8226
 	select SND_SOC_MSM_HOSTLESS_PCM
 	select SND_SOC_WCD9306
 	select SND_DYNAMIC_MINORS
-	select DOLBY_DAP
-	select DTS_SRS_TM
 	select QTI_PP
 	help
 	 To add support for SoC audio on MSM8226.
@@ -239,15 +205,11 @@ config SND_SOC_APQ8084
 	select SND_SOC_WCD9320
 	select SND_DYNAMIC_MINORS
 	select AUDIO_OCMEM
-	select DOLBY_DAP
-	select DTS_SRS_TM
 	select QTI_PP
 	select SND_SOC_CPE
-	select DOLBY_DS2
 	select SND_SOC_TPA6165A2
 	select SND_SOC_TFA9890
 	select SND_SOC_FSA8500
-
 	help
 	 To add support for SoC audio on APQ8084.
 	 This will enable sound soc drivers which
@@ -264,7 +226,6 @@ config SND_SOC_MSMSAMARIUM
 	select SND_SOC_WCD9306
 	select SND_DYNAMIC_MINORS
 	select AUDIO_OCMEM
-	select DOLBY_DAP
 	help
 	 To add support for SoC audio on MSMSAMARIUM.
 
diff --git a/sound/soc/msm/qdsp6v2/Makefile b/sound/soc/msm/qdsp6v2/Makefile
index bdcd0ccbf4eaea4fb2f221d343a36199d53bb758..24777cc445d32c404766ad649640084ac929c6ff 100644
--- a/sound/soc/msm/qdsp6v2/Makefile
+++ b/sound/soc/msm/qdsp6v2/Makefile
@@ -8,9 +8,6 @@ snd-soc-qdsp6v2-objs += msm-dai-q6-v2.o msm-pcm-q6-v2.o msm-pcm-routing-v2.o \
 			msm-pcm-routing-devdep.o
 obj-$(CONFIG_SND_SOC_QDSP6V2) += snd-soc-qdsp6v2.o msm-pcm-dtmf-v2.o \
 				 msm-dai-stub-v2.o
-obj-$(CONFIG_DOLBY_DAP) += msm-dolby-dap-config.o
-obj-$(CONFIG_DOLBY_DS2) += msm-ds2-dap-config.o
-obj-$(CONFIG_DTS_SRS_TM) += msm-dts-srs-tm-config.o
 obj-$(CONFIG_QTI_PP) += msm-qti-pp-config.o
 obj-y += q6adm.o q6afe.o q6asm.o q6audio-v2.o q6voice.o q6core.o audio_acdb.o \
 	 rtac.o q6lsm.o audio_slimslave.o