diff --git a/firmware/main/timecube.cpp b/firmware/main/timecube.cpp
index 38a071f4620ddc5f2b920c312ff8992a4a4b112e..e292a533d7a4dd659dadb84a85542b0a0a427e26 100755
--- a/firmware/main/timecube.cpp
+++ b/firmware/main/timecube.cpp
@@ -30,7 +30,7 @@
#ifdef SERIAL_DEBUG
#define SDBG(MSG) Serial.print(MSG)
#define SDBGF(MSG, ...) Serial.printf(MSG, __VA_ARGS__)
- #define SDBGLN(MSG) Serial.println(MSG)
+ #define SDBGLN(MSG) Serial.print(MSG "\r\n")
#else
#define SDBG(MSG)
#define SDBGF(MSG, ...)
@@ -40,7 +40,7 @@
static void resetSystem();
static void gotoDeepSleep(unsigned long long wakeupTime, bool force = false);
-static bool sync();
+static bool syncData();
static bool uploadData();
static bool updateTime();
static bool wlanConnect();
@@ -76,7 +76,7 @@ void setup() {
// Wait 10 ms
delay(10);
- SDBGF("Starting Watchdog (Bug Counter: %d)...\n", bug_counter);
+ SDBGF("Starting Watchdog (Bug Counter: %d)...\r\n", bug_counter);
#define DEINIT_TIMEOUT (60 * 1000 * 1000)
timer = timerBegin(0, 80, true);
timerAttachInterrupt(timer, &resetSystem, true);
@@ -103,7 +103,7 @@ void setup() {
{
time_t now;
time(&now);
- SDBGF("Wakeup at %s\n", formatTime(now));
+ SDBGF("Wakeup at %s\r\n", formatTime(now));
}
// Set up Accelerometer
@@ -127,7 +127,7 @@ void setup() {
case ESP_SLEEP_WAKEUP_EXT1: SDBGLN("EXT1 (should not happen)"); break;
case ESP_SLEEP_WAKEUP_TOUCHPAD: SDBGLN("Touchpad (should not happen)"); break;
case ESP_SLEEP_WAKEUP_ULP: SDBGLN("ULP (should not happen)"); break;
- default : SDBGF("Unknown reason %d (should not happen)\n", wakeup_reason); break;
+ default : SDBGF("Unknown reason %d (should not happen)\r\n", wakeup_reason); break;
}
// Do we need an WLAN synchronization?
@@ -152,8 +152,8 @@ void setup() {
// do update
if(update) {
- SDBGF("Sync #%d\n", ++sync_counter);
- sync();
+ SDBGF("Sync #%d\r\n", ++sync_counter);
+ syncData();
// New Timer Wakeup
time(&now);
@@ -205,7 +205,7 @@ static uint8_t getBattery() {
// Battery voltage is 2x the voltage measured here
// due to an on-board voltage divider used for measurement
uint32_t voltage = 2 * esp_adc_cal_raw_to_voltage(rawval, &adc_chars);
- SDBGF(" Battery Voltage: %dmV\n", voltage);
+ SDBGF(" Battery Voltage: %dmV\r\n", voltage);
if(voltage > BATTERY_MAX) {
@@ -215,9 +215,9 @@ static uint8_t getBattery() {
} else {
battery = (voltage - BATTERY_MIN) * 100 / (BATTERY_MAX - BATTERY_MIN);
}
- SDBGF(" * Battery State from ADC: %d%%\n", battery);
+ SDBGF(" * Battery State from ADC: %d%%\r\n", battery);
} else {
- SDBGF("Using Battery State from Previous Call: %d%%\n", battery);
+ SDBGF("Using Battery State from Previous Call: %d%%\r\n", battery);
}
return battery;
@@ -272,7 +272,7 @@ static bool checkSide(bool forceNewEntry) {
timestamp.set_side(side);
timelog[timelog_entry++] = timestamp;
- SDBGF("Currently active side: %d\n", side);
+ SDBGF("Currently active side: %d\r\n", side);
return true;
}
return false;
@@ -363,7 +363,7 @@ static bool updateTime() {
// Update entries
uint32_t delta = new_ts - old_ts;
- SDBGF("Updating timelog entries with new time (delta: %ds)\n", delta);
+ SDBGF("Updating timelog entries with new time (delta: %ds)\r\n", delta);
for (int i = 0; i < timelog_entry; i++) {
timelog[i].set_time(timelog[i].get_time() + delta);
}
@@ -383,13 +383,13 @@ static bool uploadData() {
const size_t content_length = (timelog_entry == 0) ? 15 : (17 + timelog_entry * 9);
#ifdef SERIAL_DEBUG
{
- SDBGF("Trying to send %d timelog entries (Content-Length: %d Bytes) to " SYNC_HOST "\n", timelog_entry, content_length);
- SDBGF(" MAC: %04X%08X\n",(uint16_t)(mac>>32), (uint32_t)mac);
- SDBGF(" Battery: %d%%\n", battery);
- SDBGF(" Current Time: %s (UNIX Timestamp: %ld)\n", formatTime(now), now);
+ SDBGF("Trying to send %d timelog entries (Content-Length: %d Bytes) to " SYNC_HOST "\r\n", timelog_entry, content_length);
+ SDBGF(" MAC: %04X%08X\r\n",(uint16_t)(mac>>32), (uint32_t)mac);
+ SDBGF(" Battery: %d%%\r\n", battery);
+ SDBGF(" Current Time: %s (UNIX Timestamp: %ld)\r\n", formatTime(now), now);
SDBGLN(" Data:");
for (int i = 0; i < timelog_entry; i++) {
- SDBGF(" [%d] Side %d at %s (UNIX Timestamp: %ld)\n", i, timelog[i].get_side(), formatTime(timelog[i].get_time()), timelog[i].get_time());
+ SDBGF(" [%d] Side %d at %s (UNIX Timestamp: %ld)\r\n", i, timelog[i].get_side(), formatTime(timelog[i].get_time()), timelog[i].get_time());
}
}
#endif
@@ -412,7 +412,7 @@ static bool uploadData() {
SDBGLN(" Response from " SYNC_HOST ":");
for (int t = 0; t<20 && client.connected();t++) {
String line = client.readStringUntil('\n');
- SDBGF(" [line %d] %s\n", t, line.c_str());
+ SDBGF(" [line %d] %s\r\n", t, line.c_str());
if(line == "HTTP/1.1 200 OK\r" || line == "HTTP/1.0 200 OK\r") {
return true;
}
@@ -428,14 +428,14 @@ static bool uploadData() {
return false;
}
-static bool sync() {
+static bool syncData() {
wlanSetup();
if(!wlanConnect()) {
return false;
}
- SDBGF("IP: %s\n", WiFi.localIP().toString().c_str());
+ SDBGF("IP: %s\r\n", WiFi.localIP().toString().c_str());
delay(WLAN_RECONNECT_DELAY);
bool ret = true;
@@ -460,7 +460,7 @@ static bool sync() {
}
static void gotoDeepSleep(unsigned long long wakeupTime, bool force) {
- SDBGF("Preparing for Sleep #%d:\n", ++deep_sleep);
+ SDBGF("Preparing for Sleep #%d:\r\n", ++deep_sleep);
if(wifi_active && !force) {
SDBGLN(" * Powering down WiFi...");
@@ -493,7 +493,7 @@ static void resetSystem() {
SDBGLN("|~~~ BUG ~~~|");
SDBGLN("-=================-");
- SDBGF("[BUG %d] Watchdog triggered; Resetting System\n", bug_counter);
+ SDBGF("[BUG %d] Watchdog triggered; Resetting System\r\n", bug_counter);
#ifdef SERIAL_DEBUG
Serial.flush();
#endif