[PATCH] auxiliary vector cleanups

The size of auxiliary vector is fixed at 42 in linux/sched.h.  But it isn't
very obvious when looking at linux/elf.h.  This patch adds AT_VECTOR_SIZE
so that we can change it if necessary when a new vector is added.

Because of include file ordering problems, doing this necessitated the
extraction of the AT_* symbols into a standalone header file.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

include/asm-alpha/auxvec.h

+#ifndef __ASM_ALPHA_AUXVEC_H
+#define __ASM_ALPHA_AUXVEC_H
+
+/* Reserve these numbers for any future use of a VDSO.  */
+#if 0
+#define AT_SYSINFO		32
+#define AT_SYSINFO_EHDR		33
+#endif
+
+/* More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+   value is -1, then the cache doesn't exist.  Otherwise:
+
+      bit 0-3:	  Cache set-associativity; 0 means fully associative.
+      bit 4-7:	  Log2 of cacheline size.
+      bit 8-31:	  Size of the entire cache >> 8.
+      bit 32-63:  Reserved.
+*/
+
+#define AT_L1I_CACHESHAPE	34
+#define AT_L1D_CACHESHAPE	35
+#define AT_L2_CACHESHAPE	36
+#define AT_L3_CACHESHAPE	37
+
+#endif /* __ASM_ALPHA_AUXVEC_H */

include/asm-alpha/elf.h

 #ifndef __ASM_ALPHA_ELF_H
 #define __ASM_ALPHA_ELF_H
 
+#include <asm/auxvec.h>
+
 /* Special values for the st_other field in the symbol table.  */
 
 #define STO_ALPHA_NOPV		0x80
@@ -142,26 +144,6 @@ extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-/* Reserve these numbers for any future use of a VDSO.  */
-#if 0
-#define AT_SYSINFO		32
-#define AT_SYSINFO_EHDR		33
-#endif
-
-/* More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
-   value is -1, then the cache doesn't exist.  Otherwise:
-
-      bit 0-3:	  Cache set-associativity; 0 means fully associative.
-      bit 4-7:	  Log2 of cacheline size.
-      bit 8-31:	  Size of the entire cache >> 8.
-      bit 32-63:  Reserved.
-*/
-
-#define AT_L1I_CACHESHAPE	34
-#define AT_L1D_CACHESHAPE	35
-#define AT_L2_CACHESHAPE	36
-#define AT_L3_CACHESHAPE	37
-
 #ifdef __KERNEL__
 
 #define SET_PERSONALITY(EX, IBCS2)				\

include/asm-arm/auxvec.h

+#ifndef __ASMARM_AUXVEC_H
+#define __ASMARM_AUXVEC_H
+
+#endif

include/asm-arm26/auxvec.h

+#ifndef __ASMARM_AUXVEC_H
+#define __ASMARM_AUXVEC_H
+
+#endif

include/asm-cris/auxvec.h

+#ifndef __ASMCRIS_AUXVEC_H
+#define __ASMCRIS_AUXVEC_H
+
+#endif

include/asm-frv/auxvec.h

+#ifndef __FRV_AUXVEC_H
+#define __FRV_AUXVEC_H
+
+#endif

include/asm-h8300/auxvec.h

+#ifndef __ASMH8300_AUXVEC_H
+#define __ASMH8300_AUXVEC_H
+
+#endif

include/asm-i386/auxvec.h

+#ifndef __ASMi386_AUXVEC_H
+#define __ASMi386_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#define AT_SYSINFO		32
+#define AT_SYSINFO_EHDR		33
+
+#endif

include/asm-i386/elf.h

@@ -9,6 +9,7 @@
 #include <asm/user.h>
 #include <asm/processor.h>
 #include <asm/system.h>		/* for savesegment */
+#include <asm/auxvec.h>
 
 #include <linux/utsname.h>
 
@@ -109,13 +110,6 @@ typedef struct user_fxsr_struct elf_fpxregset_t;
 
 #define ELF_PLATFORM  (system_utsname.machine)
 
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them, start the x86-specific ones at 32.
- */
-#define AT_SYSINFO		32
-#define AT_SYSINFO_EHDR		33
-
 #ifdef __KERNEL__
 #define SET_PERSONALITY(ex, ibcs2) do { } while (0)
 

include/asm-ia64/auxvec.h

+#ifndef _ASM_IA64_AUXVEC_H
+#define _ASM_IA64_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values are in the range 0-17.  Leave some room for more of
+ * them, start the architecture-specific ones at 32.
+ */
+#define AT_SYSINFO	32
+#define AT_SYSINFO_EHDR	33
+
+#endif /* _ASM_IA64_AUXVEC_H */

include/asm-ia64/elf.h

@@ -12,6 +12,7 @@
 
 #include <asm/fpu.h>
 #include <asm/page.h>
+#include <asm/auxvec.h>
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.
@@ -177,13 +178,6 @@ extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
    relevant until we have real hardware to play with... */
 #define ELF_PLATFORM	NULL
 
-/*
- * Architecture-neutral AT_ values are in the range 0-17.  Leave some room for more of
- * them, start the architecture-specific ones at 32.
- */
-#define AT_SYSINFO	32
-#define AT_SYSINFO_EHDR	33
-
 #ifdef __KERNEL__
 #define SET_PERSONALITY(ex, ibcs2)	set_personality(PER_LINUX)
 #define elf_read_implies_exec(ex, executable_stack)					\

include/asm-m32r/auxvec.h

+#ifndef _ASM_M32R__AUXVEC_H
+#define _ASM_M32R__AUXVEC_H
+
+#endif  /* _ASM_M32R__AUXVEC_H */

include/asm-m68k/auxvec.h

+#ifndef __ASMm68k_AUXVEC_H
+#define __ASMm68k_AUXVEC_H
+
+#endif

include/asm-m68knommu/auxvec.h

+#ifndef __ASMm68k_AUXVEC_H
+#define __ASMm68k_AUXVEC_H
+
+#endif

include/asm-mips/auxvec.h

+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif /* _ASM_AUXVEC_H */

include/asm-parisc/auxvec.h

+#ifndef __ASMPARISC_AUXVEC_H
+#define __ASMPARISC_AUXVEC_H
+
+#endif

include/asm-ppc/auxvec.h

+#ifndef __PPC_AUXVEC_H
+#define __PPC_AUXVEC_H
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+#endif

include/asm-ppc/elf.h

@@ -7,6 +7,7 @@
 #include <asm/types.h>
 #include <asm/ptrace.h>
 #include <asm/cputable.h>
+#include <asm/auxvec.h>
 
 /* PowerPC relocations defined by the ABIs */
 #define R_PPC_NONE		0
@@ -122,16 +123,6 @@ extern int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpu);
 
 #define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
 
-/*
- * We need to put in some extra aux table entries to tell glibc what
- * the cache block size is, so it can use the dcbz instruction safely.
- */
-#define AT_DCACHEBSIZE		19
-#define AT_ICACHEBSIZE		20
-#define AT_UCACHEBSIZE		21
-/* A special ignored type value for PPC, for glibc compatibility.  */
-#define AT_IGNOREPPC		22
-
 extern int dcache_bsize;
 extern int icache_bsize;
 extern int ucache_bsize;

include/asm-ppc64/auxvec.h

+#ifndef __PPC64_AUXVEC_H
+#define __PPC64_AUXVEC_H
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+/* The vDSO location. We have to use the same value as x86 for glibc's
+ * sake :-)
+ */
+#define AT_SYSINFO_EHDR		33
+
+#endif /* __PPC64_AUXVEC_H */

include/asm-ppc64/elf.h

@@ -4,6 +4,7 @@
 #include <asm/types.h>
 #include <asm/ptrace.h>
 #include <asm/cputable.h>
+#include <asm/auxvec.h>
 
 /* PowerPC relocations defined by the ABIs */
 #define R_PPC_NONE		0
@@ -237,21 +238,6 @@ do {								\
 
 #endif
 
-/*
- * We need to put in some extra aux table entries to tell glibc what
- * the cache block size is, so it can use the dcbz instruction safely.
- */
-#define AT_DCACHEBSIZE		19
-#define AT_ICACHEBSIZE		20
-#define AT_UCACHEBSIZE		21
-/* A special ignored type value for PPC, for glibc compatibility.  */
-#define AT_IGNOREPPC		22
-
-/* The vDSO location. We have to use the same value as x86 for glibc's
- * sake :-)
- */
-#define AT_SYSINFO_EHDR		33
-
 extern int dcache_bsize;
 extern int icache_bsize;
 extern int ucache_bsize;