LCM : Fix the Dijing LCM flicker problem

Do not add ESD function, previous CL enabled ESD as well and
was reverted with CL/217627.

Requires bootloader version .06 or later.

Bug: 21430366

arch/arm/boot/dts/qcom/dsi-panel-dijingILI9881C-720p-video.dtsi

@@ -27,13 +27,13 @@
 		qcom,mdss-dsi-stream = <0>;
 		qcom,mdss-dsi-panel-width = <720>;
 		qcom,mdss-dsi-panel-height = <1280>;
-		qcom,mdss-dsi-h-front-porch = <52>;
-		qcom,mdss-dsi-h-back-porch = <100>;
-		qcom,mdss-dsi-h-pulse-width = <24>;
+		qcom,mdss-dsi-h-front-porch = <150>;
+		qcom,mdss-dsi-h-back-porch = <150>;
+		qcom,mdss-dsi-h-pulse-width = <10>;
 		qcom,mdss-dsi-h-sync-skew = <0>;
-		qcom,mdss-dsi-v-front-porch = <8>;
-		qcom,mdss-dsi-v-back-porch = <20>;
-		qcom,mdss-dsi-v-pulse-width = <4>;
+		qcom,mdss-dsi-v-front-porch = <20>;
+		qcom,mdss-dsi-v-back-porch = <19>;
+		qcom,mdss-dsi-v-pulse-width = <2>;
 		qcom,mdss-dsi-h-left-border = <0>;
 		qcom,mdss-dsi-h-right-border = <0>;
 		qcom,mdss-dsi-v-top-border = <0>;
@@ -323,12 +323,6 @@
 			B2 D1
 			23 01 00 00 01 00 02
 			B5 06
-			23 01 00 00 01 00 02
-			8B F3
-			23 01 00 00 01 00 02
-			7A 10
-			23 01 00 00 01 00 02
-			21 30
 			29 01 00 00 01 00 04
 			FF 98 81 01
 			23 01 00 00 01 00 02
@@ -452,7 +446,7 @@
 		qcom,mdss-dsi-lane-1-state;
 		qcom,mdss-dsi-lane-2-state;
 		qcom,mdss-dsi-lane-3-state;
-		qcom,mdss-dsi-panel-timings = [7a 1a 12 00 3e 42 16 1e 14 03 04 00];
+		qcom,mdss-dsi-panel-timings = [8b 1e 14 00 44 48 18 4a 19 03 04 00];
 		qcom,mdss-dsi-t-clk-post = <0x04>;
 		qcom,mdss-dsi-t-clk-pre = <0x1b>;
 		qcom,mdss-dsi-bl-min-level = <1>;
@@ -464,6 +458,11 @@
 		qcom,mdss-dsi-bl-pmic-bank-select = <0>;
 		qcom,mdss-dsi-pwm-gpio = <&pm8916_mpps 4 0>;
 		qcom,mdss-dsi-reset-sequence = <1 20>, <0 10>, <1 20>;
+
+		qcom,mdss-dsi-panel-status-command = [06 01 00 01 05 00 02 0A 08];
+		qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
+		qcom,mdss-dsi-panel-status-check-mode = "reg_read";
+		qcom,mdss-dsi-panel-status-value = <0x9c>;
 	};
 };