Bluetooth: Remove deprecated hci_usb driver

The old hci_usb driver has been fully replaced with the new btusb driver
and all major distributions switched to the new driver now. This removes
it since it should not be used at all anymore.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/Kconfig

@@ -2,26 +2,6 @@
 menu "Bluetooth device drivers"
 	depends on BT
 
-config BT_HCIUSB
-	tristate "HCI USB driver (old version)"
-	depends on USB && BT_HCIBTUSB=n
-	help
-	  Bluetooth HCI USB driver.
-	  This driver is required if you want to use Bluetooth devices with
-	  USB interface.
-
-	  Say Y here to compile support for Bluetooth USB devices into the
-	  kernel or say M to compile it as module (hci_usb).
-
-config BT_HCIUSB_SCO
-	bool "SCO (voice) support"
-	depends on BT_HCIUSB
-	help
-	  This option enables the SCO support in the HCI USB driver. You need this
-	  to transmit voice data with your Bluetooth USB device.
-
-	  Say Y here to compile support for SCO over HCI USB.
-
 config BT_HCIBTUSB
 	tristate "HCI USB driver"
 	depends on USB

drivers/bluetooth/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the Linux Bluetooth HCI device drivers.
 #
 
-obj-$(CONFIG_BT_HCIUSB)		+= hci_usb.o
 obj-$(CONFIG_BT_HCIVHCI)	+= hci_vhci.o
 obj-$(CONFIG_BT_HCIUART)	+= hci_uart.o
 obj-$(CONFIG_BT_HCIBCM203X)	+= bcm203x.o

drivers/bluetooth/hci_usb.h

-/* 
-   HCI USB driver for Linux Bluetooth protocol stack (BlueZ)
-   Copyright (C) 2000-2001 Qualcomm Incorporated
-   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
-   Copyright (C) 2003 Maxim Krasnyansky <maxk@qualcomm.com>
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License version 2 as
-   published by the Free Software Foundation;
-
-   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
-   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
-   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
-   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
-   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
-   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
-   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
-   SOFTWARE IS DISCLAIMED.
-*/
-
-/* Class, SubClass, and Protocol codes that describe a Bluetooth device */
-#define HCI_DEV_CLASS		0xe0	/* Wireless class */
-#define HCI_DEV_SUBCLASS	0x01	/* RF subclass */
-#define HCI_DEV_PROTOCOL	0x01	/* Bluetooth programming protocol */
-
-#define HCI_IGNORE		0x01
-#define HCI_RESET		0x02
-#define HCI_DIGIANSWER		0x04
-#define HCI_CSR			0x08
-#define HCI_SNIFFER		0x10
-#define HCI_BCM92035		0x20
-#define HCI_BROKEN_ISOC		0x40
-#define HCI_WRONG_SCO_MTU	0x80
-
-#define HCI_MAX_IFACE_NUM	3
-
-#define HCI_MAX_BULK_TX		4
-#define HCI_MAX_BULK_RX		1
-
-#define HCI_MAX_ISOC_RX		2
-#define HCI_MAX_ISOC_TX		2
-
-#define HCI_MAX_ISOC_FRAMES	10
-
-struct _urb_queue {
-	struct list_head head;
-	spinlock_t       lock;
-};
-
-struct _urb {
-	struct list_head  list;
-	struct _urb_queue *queue;
-	int               type;
-	void              *priv;
-	struct urb        urb;
-};
-
-static inline void _urb_queue_init(struct _urb_queue *q)
-{
-	INIT_LIST_HEAD(&q->head);
-	spin_lock_init(&q->lock);
-}
-
-static inline void _urb_queue_head(struct _urb_queue *q, struct _urb *_urb)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&q->lock, flags);
-	/* _urb_unlink needs to know which spinlock to use, thus smp_mb(). */
-	_urb->queue = q; smp_mb(); list_add(&_urb->list, &q->head);
-	spin_unlock_irqrestore(&q->lock, flags);
-}
-
-static inline void _urb_queue_tail(struct _urb_queue *q, struct _urb *_urb)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&q->lock, flags);
-	/* _urb_unlink needs to know which spinlock to use, thus smp_mb(). */
-	_urb->queue = q; smp_mb(); list_add_tail(&_urb->list, &q->head);
-	spin_unlock_irqrestore(&q->lock, flags);
-}
-
-static inline void _urb_unlink(struct _urb *_urb)
-{
-	struct _urb_queue *q;
-	unsigned long flags;
-
-	smp_mb();
-	q = _urb->queue;
-	/* If q is NULL, it will die at easy-to-debug NULL pointer dereference.
-	   No need to BUG(). */
-	spin_lock_irqsave(&q->lock, flags);
-	list_del(&_urb->list); _urb->queue = NULL;
-	spin_unlock_irqrestore(&q->lock, flags);
-}
-
-struct hci_usb {
-	struct hci_dev		*hdev;
-
-	unsigned long		state;
-
-	struct usb_device	*udev;
-
-	struct usb_host_endpoint	*bulk_in_ep;
-	struct usb_host_endpoint	*bulk_out_ep;
-	struct usb_host_endpoint	*intr_in_ep;
-
-	struct usb_interface		*isoc_iface;
-	struct usb_host_endpoint	*isoc_out_ep;
-	struct usb_host_endpoint	*isoc_in_ep;
-
-	__u8			ctrl_req;
-
-	struct sk_buff_head	transmit_q[4];
-
-	rwlock_t		completion_lock;
-
-	atomic_t		pending_tx[4];		/* Number of pending requests */
-	struct _urb_queue	pending_q[4];		/* Pending requests */
-	struct _urb_queue	completed_q[4];		/* Completed requests */
-};
-
-/* States  */
-#define HCI_USB_TX_PROCESS	1
-#define HCI_USB_TX_WAKEUP	2