Define new netlink socket security classes introduced by upstream kernel commit
6c6d2e9bde1c1c87a7ead806f8f5e2181d41a652 ("selinux: update netlink socket
classes").  This was merged in Linux 4.2 and is therefore only required
for Android kernels based on 4.2 or newer (e.g. the android-4.4 branch
of the kernel/common tree).

Add the new socket classes to socket_class_set.
Add an initial set of allow rules although further refinement
will likely be necessary.  Any allow rule previously written
on :netlink_socket may need to be rewritten or duplicated for
one or more of the more specific classes.  For now, we retain
the existing :netlink_socket rules for compatibility on older kernels.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

(cherry picked from commit 01d95c23)

Change-Id: Ic00a0d474730cda91ba3bc387e0cc14482f82114

Confirmed via audit logs that it is not required.

Change-Id: I01d4b7ec15d4c852a9f28daf0b40ab4bce930125

Motivation: Domain is overly permissive. Start removing permissions
from domain and assign them to the domain_deprecated attribute.
Domain_deprecated and domain can initially be assigned to all
domains. The goal is to not assign domain_deprecated to new domains
and to start removing domain_deprecated where it is not required or
reassigning the appropriate permissions to the inheriting domain
when necessary.

Bug: 25433265
Change-Id: I8b11cb137df7bdd382629c98d916a73fe276413c

When the toolbox domain was introduced, we allowed all domains to exec it
to avoid breakage.  However, only domains that were previously allowed the
ability to exec /system files would have been able to do this prior to the
introduction of the toolbox domain.  Remove the rule from domain.te and add
rules to all domains that are already allowed execute_no_trans to system_file.
Requires coordination with device-specific policy changes with the same Change-Id.

Change-Id: Ie46209f0412f9914857dc3d7c6b0917b7031aae5
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

A common source of mistakes when authoring sepolicy is properly
setting up property sets. This is a 3 part step of:
1. Allowing the unix domain connection to the init/property service
2. Allowing write on the property_socket file
3. Allowing the set on class property_service

The macro unix_socket_connect() handled 1 and 2, but could be
confusing for first time policy authors. 3 had to be explicitly
added.

To correct this, we introduce a new macros:
set_prop(sourcedomain, targetprop)

This macro handles steps 1, 2 and 3.

No difference in sediff is expected.

(cherrypicked from commit 625a3526)

Change-Id: I630ba0178439c935d08062892990d43a3cc1239e
Signed-off-by: William Roberts <william.c.roberts@linux.intel.com>

A common source of mistakes when authoring sepolicy is properly
setting up property sets. This is a 3 part step of:
1. Allowing the unix domain connection to the init/property service
2. Allowing write on the property_socket file
3. Allowing the set on class property_service

The macro unix_socket_connect() handled 1 and 2, but could be
confusing for first time policy authors. 3 had to be explicitly
added.

To correct this, we introduce a new macros:
set_prop(sourcedomain, targetprop)

This macro handles steps 1, 2 and 3.

No difference in sediff is expected.

Change-Id: I630ba0178439c935d08062892990d43a3cc1239e
Signed-off-by: William Roberts <william.c.roberts@linux.intel.com>

Introduce a net_radio_prop type for net. properties that can be
set by radio or system.
Introduce a system_radio_prop type for sys. properties that can be
set by radio or system.
Introduce a dhcp_prop type for properties that can be set by dhcp or system.
Drop the rild_prop vs radio_prop distinction; this was an early
experiment to see if we could separate properties settable by rild
versus other radio UID processes but it did not pan out.

Remove the ability to set properties from unconfineddomain.
Allow init to set any property.  Allow recovery to set ctl_default_prop
to restart adbd.

Change-Id: I5ccafcb31ec4004dfefcec8718907f6b6f3e0dfd
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Introduce wakelock_use(). This macro declares that a domain uses
wakelocks.

Wakelocks require both read-write access to files in /sys/power, and
CAP_BLOCK_SUSPEND. This macro helps ensure that both capabilities and
file access are granted at the same time.

Still TODO: fix device specific wakelock use.

Change-Id: Ib98ff374a73f89e403acd9f5e024988f59f08115

Old Android kernels (e.g. kernel/goldfish android-2.6.29 commit 2bda29)
fell back to a CAP_SYS_ADMIN check even before checking uids if the cgroup
subsystem did not define its own can_attach handler.  This doesn't appear
to have ever been the case of mainline, and is not true of the 3.4 Android
kernels.  So we no longer need to dontaudit sys_admin to avoid log noise.

Change-Id: I2faade6665a4adad91472c95f94bd922a449b240
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Anything writable by rild should be in radio_data_file or efs_file.
System data should be read-only.

Change-Id: I442a253c22f567a147d0591d623e97a6ee8b76e3
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Audit attempts by rild to create/write to system_data_file
with avc:  granted messages so that we can identify any such
instances and put such directories/files into radio_data_file or
some other type and then remove these rules.

Change-Id: Ice20fed1733a3f4208d541a4baaa8b6c6f44fbb0
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Move the rild domain into SELinux enforcing mode. This will
start enforcing SELinux rules; security policy violations will
return EPERM.

Change-Id: Iadb51616ecf6f56148ce076d47f04511810de94c

Change-Id: I620d4aef84a5d4565abb1695db54ce1653612bce
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Replace * or any permission set containing create with
create_socket_perms or create_stream_socket_perms.

Add net_domain() to all domains using network sockets and
delete rules already covered by domain.te or net.te.

For netlink_route_socket, only nlmsg_write needs to be separately
granted to specific domains that are permitted to modify the routing
table.   Clarification:  read/write permissions are just ability to
perform read/recv() or write/send() on the socket, whereas nlmsg_read/
nlmsg_write permissions control ability to observe or modify the
underlying kernel state accessed via the socket.
See security/selinux/nlmsgtab.c in the kernel for the mapping of
netlink message types to nlmsg_read or nlmsg_write.

Delete legacy rule for b/12061011.

This change does not touch any rules where only read/write were allowed
to a socket created by another domain (inherited across exec or
received across socket or binder IPC).  We may wish to rewrite some or all
of those rules with the rw_socket_perms macro but that is a separate
change.

Change-Id: Ib0637ab86f6d388043eff928e5d96beb02e5450e
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Permissive domains are only intended for development.
When a device launches, we want to ensure that all
permissive domains are in, at a minimum, unconfined+enforcing.

Add FORCE_PERMISSIVE_TO_UNCONFINED to Android.mk. During
development, this flag is false, and permissive domains
are allowed. When SELinux new feature development has been
frozen immediately before release, this flag will be flipped
to true. Any previously permissive domains will move into
unconfined+enforcing.

This will ensure that all SELinux domains have at least a
minimal level of protection.

Unconditionally enable this flag for all user builds.

Change-Id: I1632f0da0022c80170d8eb57c82499ac13fd7858

Denials seen on hammerhead but seem
appropriate for general policy.

<5>[ 8.339347] type=1400 audit(3731546.390:17): avc: denied { ioctl } for pid=314 comm="rild" path="socket:[7996]" dev="sockfs" ino=7996 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=socket
<5>[ 8.339065] type=1400 audit(3731546.390:16): avc: denied { create } for pid=314 comm="rild" scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=socket
<5>[ 11.232121] type=1400 audit(3731549.289:22): avc: denied { read } for pid=620 comm="rild" scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=socket

Change-Id: Ieaca5360afbb44d5da21c7c24bdd5e7c5758f0a2

Change-Id: I6df9981b2af0150c6379a0ebdbe0a8597c994f4a
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

This change removes the permissive line from unconfined
domains. Unconfined domains can do (mostly) anything, so moving
these domains into enforcing should be a no-op.

The following domains were deliberately NOT changed:
1) kernel
2) init

In the future, this gives us the ability to tighten up the
rules in unconfined, and have those tightened rules actually
work.

When we're ready to tighten up the rules for these domains,
we can:

1) Remove unconfined_domain and re-add the permissive line.
2) Submit the domain in permissive but NOT unconfined.
3) Remove the permissive line
4) Wait a few days and submit the no-permissive change.

For instance, if we were ready to do this for adb, we'd identify
a list of possible rules which allow adbd to work, re-add
the permissive line, and then upload those changes to AOSP.
After sufficient testing, we'd then move adb to enforcing.
We'd repeat this for each domain until everything is enforcing
and out of unconfined.

Change-Id: If674190de3262969322fb2e93d9a0e734f8b9245

Change-Id: Ie0ee266e9e6facb2ab2abd652f68765239a41af1

This prevents denials from being generated by the base policy.
Over time, these rules will be incrementally tightened to improve
security.

Change-Id: I4be1c987a5d69ac784a56d42fc2c9063c402de11

Bug: 4070557
Change-Id: I027f76cff6df90e9909711cb81fbd17db95233c1

Change-Id: Iafe68ac1b742e40c1a23a2f6cfd6373ea89cc07b

Change-Id: Ia7457e3fd4f1100bbee821f412e80ba17fede5ec

Change-Id: I448a5553937a98775178b94f289ccb45ae862876
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Change-Id: I448a5553937a98775178b94f289ccb45ae862876
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>

Assortment of policy changes include:
 * Bluetooth domain to talk to init and procfs.
 * New device node domains.
 * Allow zygote to talk to its executable.
 * Update system domain access to new device node domains.
 * Create a post-process sepolicy with dontaudits removed.
 * Allow rild to use the tty device.

Change-Id: Ibb96b590d0035b8f6d1606cd5e4393c174d10ffb
Signed-off-by: rpcraig <rpcraig@tycho.ncsc.mil>

Two new types are introduced:
sdcard_internal
sdcard_external

The existing type of sdcard, is dropped and a new attribute
sdcard_type is introduced.

The boolean app_sdcard_rw has also been changed to allow for
controlling untrusted_app domain to use the internal and external
sdcards.

Change-Id: Ic7252a8e1703a43cb496413809d01cc6cacba8f5

perms.

Tested on a maguro variant.

Only label properties with the ril. prefix with rild_prop.
Allow rild and system (and radio) to set radio_prop.
Only rild can set rild_prop presently.

New property_contexts file for property selabel backend.
New property.te file with property type declarations.
New property_service security class and set permission.
Allow rules for setting properties.